Repair guide for iPhone 11 Screens

If you need assistance with repairing the screen of your iPhone 11, then you are in luck! This blog post offers an easy-to-follow step-by-step guide on how to repair your device’s screen correctly. With these tips and tools, you will be well-equipped to tackle the job successfully. Whether you’re a tech expert or a novice, you’ll be able to confidently repair your iPhone 11 screen in no time at all. Read on to get started!
9 Steps for repairing cracked or broken iPhone 11 screens
1. Gather the necessary tools: You’ll need a Phillips screwdriver, a suction cup, a plastic opening tool, and a replacement screen.
2. Power off the iPhone: Press and hold the power button of your device until the “slide to power off” slider appears, then slide it to power off the device.
3. Remove the two screws on the bottom of the phone: These screws hold the screen in place, so you will need to remove them in order to access the screen.
4. Use the suction cup to lift the screen: Place the suction cup on the screen near the bottom of the phone, then gently pull up to create a small opening between the screen and the phone.
5. Insert the plastic opening tool: Use the plastic opening tool to gently pry open the screen, being careful not to damage the cables inside.
6. Disconnect the cables: Once you have opened the screen, you will see several cables connecting the screen to the rest of the phone. Carefully disconnect these cables by pulling on the connectors, not the cables themselves.
7. Remove the old screen: Once the cables are disconnected, you can lift the old screen out of the phone.
8. Install the new screen: Take the replacement screen and line up the connectors with the ports on the phone. Carefully press the connectors into place, then replace the screws at the bottom of the phone to hold the screen in place.
9. Test the new screen: Power on the phone to make sure the new screen is working properly. If everything looks good, you’re all set!